Betco LiquiShield Concrete Guard (BET16790400)

General Information

---

Manufacturer:Betco Corporation
Manufacturer Part Number:16790400
Manufacturer Website Address:http://www.betco.com
Brand Name:Betco
Product Line:LiquiShield
Product Name:LiquiShield Concrete Guard
Marketing Information:LiquiShield Concrete Guard is a water-based guard formulated to improve gloss while adding substantial protection against stain and etch. Low-odor guard is easy to apply and requires only two coats to cover 3,000 to 4,000 square feet per gallon. LiquiShield eliminates the need for floor finish and conventional coatings by resisting scuffs, black marks and soil. It will not peel, flake or discolor. Breathable formula is ideal for concrete, terrazzo and other porous stone surfaces.

Packaged Quantity:4 / Carton
Product Type:Floor Polish

Product Information

---

Cleaner Type:Liquid
Cleaner Volume:128 fl oz (4 quart)
pH:7 - 9
Recommended Use:

• Scuff Mark Remover
• Black Mark Remover
• Soil Remover
• Stain Remover

Directions/Instructions:

Recommended for polished concrete and terrazzo surfaces for extended stain and etch protection. Clean entire area with Betco DensiClean, allow floor to dry prior to application. Apply Betco LiquiShield at proper application rate, 3,000 to 4,000 sq. ft. per gal, with a low-pressure sprayer spread with a microfiber applicator pad or mop and bucket application. Allow to dry to touch, 45 to 60 minutes, then apply second coat using the same procedures. Allow second coat to dry 60 minnutes then high speed burnish with Betco Si Burnish Pad. Allow 1 to 2 hours cure time before floor is exposed to full traffic. Allow 24 hours before the use of cleaners on the floor. Maintain floor with Betco Crete Rx DensiClean and Betco Crete Rx Cleaning Pads for maximum protection and shine.

Application/Usage:Multi Surface
Features:

• Water Based
• Low Odor

Physical Characteristics

---

Product Color:Opaque White

Miscellaneous

---

Recycled:No
Assembly Required:No
Country of Origin:United States