Betco Hard As Nails Floor Finish (BET6595900)

General Information

---

Manufacturer:Betco Corporation
Manufacturer Part Number:6595900
Manufacturer Website Address:http://www.betco.com
Brand Name:Betco
Product Line:Hard As Nails
Product Name:Hard As Nails Floor Finish
Marketing Information:This self-leveling, self-sealing floor finish uses highly durable, internally cross-linked polymers blended to achieve a harder floor finish film. Unique chemistry results in a high-gloss, long-wearing finish that cures faster and harder than any other metal-interlock finish. Hard film formula requires less maintenance and resists dirt embedment. It is the perfect labor-saving advantage for Educational and Retail facilities that have little or no time for floor burnishing. Use Hard As Nails Hard Film Floor Finish on all types of resilient tile (vinyl composition, vinyl, linoleum) and properly sealed hard surfaces (marble, terrazzo). It dries clear and has a mild fragrance.

Packaged Quantity:2 / Carton
Product Type:Floor Finish

Product Information

---

Cleaner Type:Liquid
Cleaner Volume:153.6 fl oz (4.8 quart)
Scent:Mild
Composition:

• Water
• Acrylic Polymer
• Ethoxydiglycol
• Tributoxyethyl Phosphate
• Dipropylene Glycol Methyl Ether
• Wax
• Partially Fluorinated Alcohol Surfactant
• Siloxane
• Methylchloroisothiazolinone
• Methylisothiazolinone

pH:8.1 - 8.9
Directions/Instructions:

Recommended for use on all types of resilient tile (vinyl composition, vinyl, linoleum) and properly sealed hard surfaces (marble, terrazzo).

RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures and humidity may extend dry time. 4 - 5 coats of finish are recommended. Note: This product is a self sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a sealer will enhance gloss and long term performance.

ROUTINE MAINTENANCE: Sweep large debris and dust mop (using a water-based treatment). Damp mop or automatic scrub using a neutral pH cleaner. Buff or burnish the floor as desired. The use of a cleaner/restorer is recommended to condition the floor and extend the time between top scrub and recoating.

INTERIM MAINTENANCE: Sweep large debris and dust mop (using a water-based treatment). Top scrub the floor using a top scrub cleaner and recommended floor pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.

Note: Slip resistance meets or exceeds standard, (ASTM D 2047-04) James Machine 0.5 minimum.

Application/Usage:

• Floor
• Hard Floor
• Tile
• Hard Surface

Features:

• Self-Leveling
• Durable
• Dust Resistant
• Dirt Resistant
• Non-scuffing
• Self-sealing
• Styrene-free

Physical Characteristics

---

Product Color:Multi

Miscellaneous

---

Recycled:No
Assembly Required:No
Country of Origin:United States